Err42 on the NICE3000new means the door lock feedback was lost while the elevator was running. This is a serious safety fault — the controller stops the car immediately. Find the cause before restarting; never jump the door lock circuit.
Troubleshooting (Sub-codes 101, 102)
- Check the landing door connections — a loose connector on any floor’s door lock can cause intermittent faults.
- Check the door lock contactor operates correctly.
- Verify the feedback contact type (NO/NC) matches the parameter setting.
- Check the external supply voltage to the door lock circuit.
Pro Tip From the Field
Intermittent Err42 on multi-floor buildings usually means one specific landing door lock is worn — ride the car and watch at which floor the fault tends to trigger, then inspect that door lock first.
Still stuck on this fault? Our engineers repair Monarch NICE3000 systems every day. Message us on WhatsApp (+86 139 8566 2489) — send a photo of your board or the fault display, and we will identify the part and guide you through the fix. Every board we sell is 100% run-tested with a 12-month warranty, MOQ 1 piece, and free remote parameter-setup support until your elevator runs.
Browse all codes in our free NICE3000 fault code library.

发表回复