Err50 on a Monarch NICE3000new integrated controller means the leveling/door-zone signal was stuck or lost three times in a row. It is a fault we handle regularly on NICE3000new systems overseas, and in most cases it comes from sub-code 101 rather than a failed main board.
Possible Causes
- Sub-code 101: leveling signal stuck detected 3 times in a row
- Sub-code 102: leveling signal lost detected 3 times in a row
Step-by-Step Troubleshooting
- 1. Sub-codes 101, 102: a. check the leveling/door-zone sensors b. check vane verticality and insertion depth c. check the leveling input points on the main control board d. check the ropes for slipping
Pro Tip From the Field
Err50 means repeated leveling-sensor trouble – check the sensors, vane verticality/insertion, and main-board leveling inputs.
Still stuck on this fault? Our engineers repair and supply Monarch NICE3000 systems every day. Message us on WhatsApp (+86 139 8566 2489) — send a photo of your board or the fault display, and we will identify the part and guide you through the fix. Every board and part we ship is 100% run-tested before dispatch, with a 12-month warranty.

发表回复