Monarch NICE3000new Err13 — Output Phase Loss: Causes and Fixes

Err13 on a Monarch NICE3000new integrated controller means a missing phase on the controller output / motor side. It is a fault we handle regularly on NICE3000new systems overseas, and in most cases it comes from loose main-circuit output wiring rather than a failed main board.

Possible Causes

  • Loose main-circuit output wiring
  • Motor fault

Step-by-Step Troubleshooting

  1. 1. Check motor connections are tight
  2. 2. Check the run contactor operates properly
  3. 3. Confirm the motor internals are sound

Pro Tip From the Field

Check the motor terminal connections and the run contactor first; a loose output wire is the usual culprit for Err13.


Still stuck on this fault? Our engineers repair and supply Monarch NICE3000 systems every day. Message us on WhatsApp (+86 139 8566 2489) — send a photo of your board or the fault display, and we will identify the part and guide you through the fix. Every board and part we ship is 100% run-tested before dispatch, with a 12-month warranty.


评论

发表回复

您的邮箱地址不会被公开。 必填项已用 * 标注